Magneti Marelli distributor body
New Magneti Marelli distributor body.
As used on early Dino's
€450,-
Distributor upper bearing carrier
Top bearing carrier that is used in the Marelli distributors. CNC milled out of aluminum
€70,-
Distributor lower bearing carrier
Bottom bearing carrier that is used in the Marelli distributors. CNC milled out of aluminum
€60,-
Distributor bearing carrier lockplate
Used to lock the ball bearing inside the lower bearing carrier in place.
CNC milled out of aluminum
€30,-
Rigid shaft
Distributor shaft. Used when converting to an ignition system that does not rely on the mechanical advance. Shaft can be used with both the reluctor wheel as well as the chopper wheel.
€145,-
3-Lobe cam
The cam inside the distributor that operates the ignition points and distributor advance.
CNC milled, nitrated and precision ground
€155,-
​
PN# 9916524
Bearing pins for mechanical advance system
Bearing pins for the mechanical advance system. These pins can be bolted in place instead of riveted.
CNC machined and nitrated for better wear protection. Set of 2 pcs.
€35,-
Distributor drive connector assy
Adjustable coupling that connects the camshaft to the distributor.
CNC milled and nitrated for improved wear resistance
€160,-
​
PN# 4146865 & 4146868
Coupling
Coupling that connects the camshaft to the distributor
€40,-
​
PN# 4146867
Lower bearing carrier gasket
Gasket that is mounted inbetween the distributor housing and the lower bearing carrier.
€8,-
Distributor housing tag
Early and late type tag for Magneti Marelli distributor housing.
€8,-
HT-Lead set
Spark plug wire set for the later style distributor cap as shown in the picture.
Top quality spiral wire wound leads, EMI & RFI suppresed, 5kOhm per meter.
Good replacement for original ignition systems and a must for electronic systems.
€125,-
HT-Lead set
Spark plug wire set for the early style distributor cap as shown in the picture.
Top quality spiral wire wound leads, EMI & RFI suppresed, 5kOhm per meter.
Good replacement for original ignition systems and a must for electronic systems.
€125,-
​
PN# 4160369
Distributor conversion kit
Can be used to convert from the points setup to MSD inductive setup. The reluctorwheel will slide over the original 3 lobe cam and is kept in place with a grub screw. This setup works with all MSD ignition systems.
€195,-
AEC101 case
A reproduced AEC101 case.
Just an Empty case or build with a programmable MSD CD-ignition build inside.
Whatever you prefer, we can make it.
€ Ask for options
​
PN# 4216416
AEC103 case
A reproduced AEC103 case.
Just an empty case or build with an MSD CD-ignition build inside.
Whatever you prefer, we can make it.
€ Ask for options
AEC101 Plates
Set of 2 plates that are mounted on the top cover of the Dinoplex AEC101 cases.
€64,-
AEC103 Plate
Plate that is mounted on the top cover of the Dinoplex AEC103 case.
€15,-
Rear quarter panel ventilation grids
The rear ventilation grids in the of the Fiat Dino Coupé.
Exact replica from the original part that are often broken or bent.
They come as a set of 2 complete with membrane in the back.
€375,-
Door hinge bushings
To replace the old bushings in the door hinges from the Dino Coupé that are often crumbled.
Made from Nylon.
They come as a set of 4pcs.
€35,-
Dinoplex switch body
Reproduction switch body for the Dinoplex AEC101 that came with bakelite switch
Made from Nylon in black.
Just the housing, no actual switch
€110,-